Elbow 90°- gunmetal- R-thread, Rp-thread

Viega awkward connection pipe with eccentric sleeve, for tolerance compensation for toilet drain connection, with lip seal.

Brass Press Coupling with a corrosion-resistant surface with stainless steel press cap for DHW and radiator systems, stop ring, pressure indicator, color code, guaranteed leaking if not pressed. Calibration-free.Only to be used with Uponor MLC, Uni Pipe Plus and Metallic Pipe Plus pipes and with Uponor approved press tool.

Fittings with threads in acc. with DINEN 10226, Part 1, certified for drinking water in acc. with DIN 1988 and gas installations in acc. with TRGI 2008 (observe notes on the model), tested in acc. with DVGW worksheet GW 6 and GW 393.CertificatesGunmetal threaded fittings - DVGW-Reg.-No. DV-7401AO2957Threaded connectionsR-external thread, produced on site - hempen without roughening of the thread is possible.

Uponor elbow fitting 45° with a diameter of 50 mm

The threaded pipe fittings of ISIFLO is produced of dezincification resistant brass alloy (DZR). Use for cold water or warm water (max 110 degrees centigrade), air, oil or gas. Running pressure up to 10 Bar. Cylindrical thread (ISO 228/1)

Reducer pe-hd d63/50 l8 eccentric

Uponor press composite coupling ppsu 50-50

Easytop insulating shell- suitable for Easytop ball valve model 2275, 2275.1, 2275.2, 2275.3, 2275.4, 2275.5, 2275.6, 5375- self-lockingInsulating layer thickness according to EnEV

Henco 32 x 16 x 32 mm PVDF press tee for water-, heating- and cooling installations. Max. 16 bar.

Tee, reducing,with internal threads

Viega 2216

Crossover- copper- soldered connectiond: 15(quality seal for d12-54)

For cold and hot potable water, For heating water, For cooling water without antifreeze agent, For cooling water with antifreeze agent, For remote network heating water 120 °C, For saturated steam 120 °C, For service water, For ultrapure water (except pharmaceutical water), For rainwater with a pH value of > 6.0, For grey and black water with pH value > 6.0, For extinguishing water (wet), For sprinklers (wet), For chemicals and technical liquids, For compressed air (oil purity class 0-3), For negative pressure, For inert gases (e.g. nitrogen), For industrial gases (e.g. acetylene, shielding gases), For technical building systems, industry and shipbuilding, Application overview: Geberit Mapress Stainless Steel for liquid media, Application overview: Geberit Mapress Stainless Steel for gaseous media.

Viega 2216.1

Press connector system with press connectors made of copper and gunmetal tested in acc. with DVGW worksheet W 534 with DVGW test seal and pipes made of copper in acc. with EN 1057 in acc. with DVGW worksheet GW 392.Suitable for drinking water installations in acc. with DIN 1988.For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur - connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa-0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa-0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-dien-monomer rubber), up to 110 °C