Elbow 90°- gunmetal- R-thread, Rp-thread

Brass Press Coupling with a corrosion-resistant surface with stainless steel press cap for DHW and radiator systems, stop ring, pressure indicator, color code, guaranteed leaking if not pressed. Calibration-free.Only to be used with Uponor MLC, Uni Pipe Plus and Metallic Pipe Plus pipes and with Uponor approved press tool.

Uponor elbow fitting 45° with a diameter of 50 mm

T-rörskoppling för plaströr. Lämplig för PEL-, PEH- och PEM-rör, både ovan och under jord. Enkel att montera och demontera.

Henco 40 x 40 mm PVDF press elbow 45° for water-, heating- and cooling installations. Max. 16 bar.

The threaded pipe fittings of ISIFLO is produced of dezincification resistant brass alloy (DZR). Use for cold water or warm water (max 110 degrees centigrade), air, oil or gas. Running pressure up to 10 Bar. Cylindrical thread (ISO 228/1)

Henco connection tee with 2 x 3/4 eurocone and 1 x threaded end.

Cap,

Fittings with threads in acc. with DINEN 10226, Part 1, certified for drinking water in acc. with DIN 1988 and gas installations in acc. with TRGI 2008 (observe notes on the model), tested in acc. with DVGW worksheet GW 6 and GW 393.CertificatesGunmetal threaded fittings - DVGW-Reg.-No. DV-7401AO2957Threaded connectionsR-external thread, produced on site - hempen without roughening of the thread is possible.

Reducer pe-hd d63/50 l8 eccentric

Uponor press composite coupling ppsu 50-50

Henco 32 x 16 x 32 mm PVDF press tee for water-, heating- and cooling installations. Max. 16 bar.

Tee, reducing,with internal threads

90° angle for insert with tip end, Ø32, in chrome PP/TPE plastic, female/male

For building drainage, For site drainage

XPress Stainless T-piece FFF 54