Viega 2316.1

Vinkelkoppling för PEM-rör med plastgänga. Tillverkad av pressgjuten metall och godkänd enligt Reach.

Bend cst 45g d22 zn-pl

Chromium plated pipe with collar. Ø32 mm. Length: 250 mm.

Viega 2216.1XL

Press connector system with press connectors made of copper and gunmetal tested in acc. with DVGW worksheet W 534 with DVGW test seal and pipes made of copper in acc. with EN 1057 in acc. with DVGW worksheet GW 392.Suitable for drinking water installations in acc. with DIN 1988.For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur - connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa-0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa-0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-dien-monomer rubber), up to 110 °C

Copper pipe chrome 10x1200 mm.

PPSU coupling Uponor 32X25 mm

Long nipple- gunmetal- R-threadR: 34, L: 50

"Skarvrör 3/4\" till utloppsslang för disk- och tvättmaskin."

For building drainage, For site drainage

T 90° equal pvc pn16 d50

Geberit 365.120.16.1 rördelar för avlopp, avfall och ventilation (DWV)

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur - connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa-0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa-0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc-dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc-flexible, blackDimensionsPress connectors and pipes-Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63-Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations-Operating temperature max. 70 °C-Operating pressure max. 1.0 MPaHeating installations-Operating temperature max. 80 °C-Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

Material: white plast

PEM-koppling av PP, rak, plast-utv gg