Danfoss Icon2™ Main Controller for underfloor heating control. Basic model, 24V, 15 circuits. With pre-installed TWA conversion module and DK adapter with ground. Installation, adjustment and handover take place easily with the Danfoss Icon2™ Commissioning App.

Temperature - floor [°C]: 4 - 45, Temperature - room [°C]: 4 - 35, Display type: LED, Application: Floor heating

24V room thermostat for wall mounting with touch display. Can be used with a floor sensor.

male, M12, 4-pin, elbowed connector cable gland Pg 7

The MCO Home air quality monitor can detect and alarm CO2 in the air in real-time. It has built-in VOC, temperature and humidity sensors.The air...

Danfoss SSM underfloor heating manifold in stainless steel with output for 4 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Shuntskåp LK Systems VS2 Prefab är ett skåp som levereras som en komplett enhet med monterad LK Systems Fördelarshunt VS2 och LK Systems Värmekretsfördelare RF inklusive kopplingar för anslutning av golvvärmerör dim 16.

Surface mounted housing for ARGUS Presence, white

SIMATIC S7-1500, digital output module DQ 32 X 24V DC/0.5A HF, 32 channels in groups of 8, 4 A per group, single-channel diagnosis, substitute value

SIMATIC S7-1500, digital input module DI 16xDC 24V HF, 16 channels in groups of 16, input delay 0.05 ... 20MS, input type 3 (IEC 61131), diagnosis, processalarms

SIMATIC S7-1500, digital input module DI 32xDC 24V HF, 32 channels in groups of 16, input delay 0.05... 20MS, input type 3 (IEC 61131), diagnosis, processalarms

Transformator LK Systems 230/24V AC 60VA är en transformator med stickkontakt samt kabel för inkoppling till LK Systems kopplingsplint 1, LK Systems ställdonsrelä 24 V och LK Systems elektronisk termostat TR 26.

Overload relay 5.5...8.0 a for motor protection sz s00, class 10, f. mounting onto contactor main circuit: screw terminal aux. circuit: screw terminal manual-automatic-reset

Danfoss SSM underfloor heating manifold in stainless steel with output for 2 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Simatic s7-1500, digital input module, di16 x dc24v, 16 channels in groups of 16, input delay typ. 3.2ms, input type 3 (iec 61131) incl. front connector push-in

door interlock - set of 5