Union for the seat valves VRB and VRG.

Valves with pre-setting are used in water-borne two-line systems to ensure optimal distribution of the water in the heating system. Pre-set.

IHC Control input 24 V DC 24mA with 16 inputs. Used to collect the signals from the low-current switches, such as pressure control relatives, thermostats, and the like. To IHC system can be considered a low voltage system, it is a requirement that the used switches are insulated to double-insulation (8 mm creepage distance) relative to the 230 / 400V network. It is possible to place the input module 24 both centrally at the Controller and a decentralized, distributed in the installation.

The modern Meross MTS200BHK Wi-Fi smart thermostat will allow you to conveniently control the temperature in your home. Compatible with most popular electric underfloor heating systems, it stands out for its easy operation and exceptional comfort. It works with Apple HomeKit, Amazon Alexa, Google Assistant and SmartThings. It stands out for its accuracy of 0.5℃, and with its scheduling function, it reduces heating costs.

AVQML PN25 20/4.7 male thread. Made of DZR brass. Globe valve with flow control

24V room thermostat for wall mounting with touch display. Can be used with a floor sensor.

Temperature - floor [°C]: 4 - 45, Temperature - room [°C]: 4 - 35, Display type: LED, Application: Floor heating

Contact house 031E0291 Product description: Accessories and spare parts Technical specifications: Type: 3-pole contact system Application: CS

SALUS GVM underfloor heating manifold is a high flow distributor with manual balancing of each circuit.Each valve has a built-in manual flow control which is very easy to adjust. Instructions for balancing the circuit can be found in the distributor box.The SALUS GVM manifold has a manual vent on each pipe and a drain valve with 1/2 "thread for hose. The inlet- and return- connection is 1 "thread, and the thread for the actuators are 30 x 1.5 mmContains:Stainless steel distributor set with valveEurokonus for 20 mm PEXVentilation valve on inlet and returnSwivel filling and drain valveMounting bracket for wall mountingWith individual room temperature control.Salus GVM underfloor heating distributors can be supplied with SALUS wireless control.Properties of Salus Underfloor Heating Manifold:Available with Salus insulation in form-stable EPP.Meets the installation requirements for insulation standard DS 452.Can be used with water / glycol mixtures with a mixing ratio of up to 30%.Euroconus are included for all inlets and outlets for 20 mm PEX / PE-RT pipe.Ready for wall mounting.Can be integrated into the Salus Smart Home solution.Can be operated directly from the room thermostat and from the mobile phone, tablet or computer.The distribution pipes are made of stainless steel alloy AISI304 L Premium quality and extruded in dimension 1 "for optimal distribution and minimum pressure drop.Maximum working pressure: 6 BarMaximum proofing pressure: 10 bar

Henco connection tee with 2 x 3/4 eurocone and 1 x threaded end.

DEVItronic TM dehumidifiers are the perfect solution to avoidproblems with condensation in shielded electrical installations such as switchboards and control cabinets.DEVItronic TM solves moisture and condensation problems by increasing the temperature a few degrees abovethe ambient temperature.DEVItronic TM has a large surface and a low surface temperature, which ensures thatthe heater does not cause damage to plastic parts and cabinets.

Danfoss SSM underfloor heating manifold in stainless steel with output for 4 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Kompletteringskit Thermoflex Kit från Ebeco är ett kompletteringskit för större ytor som passar Thermoflex 200.

Shuntskåp LK Systems VS2 Prefab är ett skåp som levereras som en komplett enhet med monterad LK Systems Fördelarshunt VS2 och LK Systems Värmekretsfördelare RF inklusive kopplingar för anslutning av golvvärmerör dim 16.

VSH XPress valve Galvanized, Press/Press, Low

ALPHA2 is able to withstand the tough conditions in a heating system, and with four newly added features, it just got even tougher:Robust start-up:Shakes free any impurities before the pump starts at the beginning of the heating season.Summer mode:Adjustment of the pump's performance in the summer to the warmer temperature outside - giving customers extra energy efficiency.Magnetite resistance:Ensures that no small pieces of metal get stuck in the pump's vital parts when they are magnetised.Dry-running protection:Makes sure the pump never runs without liquid in the system - add to that unrivalled energy efficiency, easy installation and the fact that ALPHA2 covers both your heating demands and up to 90 % of your air-conditioning and cooling demands.The GRUNDFOS ALPHA2 is suitable for:- Systems with constant or varying flow- One pipe systems- Two pipe systems- Underfloor-heating- Domestic hot-water recirculation- Systems where night setback is required.Features an