AVQML PN25 20/4.7 male thread. Made of DZR brass. Globe valve with flow control

Temperature - floor [°C]: 4 - 45, Temperature - room [°C]: 4 - 35, Display type: LED, Application: Floor heating

Contact house 031E0291 Product description: Accessories and spare parts Technical specifications: Type: 3-pole contact system Application: CS

Danfoss Icon2™ Main Controller for underfloor heating control. Basic model, 24V, 15 circuits. With pre-installed TWA conversion module and DK adapter with ground. Installation, adjustment and handover take place easily with the Danfoss Icon2™ Commissioning App.

24V room thermostat for wall mounting with touch display. Can be used with a floor sensor.

EtherNet IP (MCA121) Product Description: For use with the FC-102, FC-202, and FC-302 series. REMEMBER kit 130B5612 when used with A4 enclosure. REMEMBER kit 130B5436 when used with A5, B1, B2, C1 and C2 enclosures.

DEVItronic TM dehumidifiers are the perfect solution to avoidproblems with condensation in shielded electrical installations such as switchboards and control cabinets.DEVItronic TM solves moisture and condensation problems by increasing the temperature a few degrees abovethe ambient temperature.DEVItronic TM has a large surface and a low surface temperature, which ensures thatthe heater does not cause damage to plastic parts and cabinets.

The MCO Home air quality monitor can detect and alarm CO2 in the air in real-time. It has built-in VOC, temperature and humidity sensors.The air...

Danfoss SSM underfloor heating manifold in stainless steel with output for 4 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Shuntskåp LK Systems VS2 Prefab är ett skåp som levereras som en komplett enhet med monterad LK Systems Fördelarshunt VS2 och LK Systems Värmekretsfördelare RF inklusive kopplingar för anslutning av golvvärmerör dim 16.

Transformator LK Systems 230/24V AC 60VA är en transformator med stickkontakt samt kabel för inkoppling till LK Systems kopplingsplint 1, LK Systems ställdonsrelä 24 V och LK Systems elektronisk termostat TR 26.

Danfoss SSM underfloor heating manifold in stainless steel with output for 2 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Insulation for Danfoss manifold FHF and FH-ME

Heatit Z-Temp2 är en batteridriven termostat avsedd för användning i vattenbaserade värmesystem. I kombination med Heatit Z-Water kan du styra ditt värmesystem med en Z-Wave-primär styrenhet/gateway. Detta är en "trådlös" lösning som sparar både tid och pengar.

Sparepart for Roth shunt

tado° Smart Radiator Thermostat X hjälper dig att spara energi och pengar varje dag, tack vare dess unika funktioner. tado° är experterna på smart värme. Våra produkter har installerats, testats och rekommenderats miljontals gånger. tado°-användare sparar i genomsnitt 22 % energi.