Danfoss icon radio module är en nödvändig komponent för de som vill ha ett trådlöst golvvärmesystem. Denna modul skickar och tar emot trådlösa signaler mellan rumstermostater och huvudkontrollenheten, vilket möjliggör en smidig och effektiv styrning av golvvärmen.
Köpguide
Vad ska man tänka på när du köper danfoss icon radio module?
Startpaket med gateway och uppkopplad radiatortermostat med Zigbee. Perfekt för att styra termostaten individuellt eller grupperade efter rum och scheman. Den batteridrivna radiatortermostaten ansluts till elementet och styrs direkt via enheten eller med en smart enhet. Kommunicerar till medföljande gateway eller till andra certifierade system som använder Zigbee teknologi. För extra radiotemostat, se (52071).
DEVIflex TM 18T (18W / m) heating cable is designed for concrete embedding or similar. both total, accumulating and comfort underfloor heating.DEVIflex TM is a 360 ° fully shielded double-conductor cable of extremely high quality with a robust outer sheath (non-UV resistant). The round profile and robust construction ensures a fast, light and secure installation in many indoor floor structures and pipe protection applications.The cold lead is an installation cable with solid conductors that ensures quick installation, and the clear and visible assembly prevents accidental installation of the heating cable in the wall.
tado° Smart Radiator Thermostat X hjälper dig att spara energi och pengar varje dag, tack vare dess unika funktioner. tado° är experterna på smart värme. Våra produkter har installerats, testats och rekommenderats miljontals gånger. tado°-användare sparar i genomsnitt 22 % energi.
Danfoss SSM underfloor heating manifold in stainless steel with output for 2 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.