Denna termostat från Rittal är ett tillbehör för klimatanläggningar. Den används för att reglera temperaturen och säkerställa en optimal drift av kylsystem och fläktar.
The Eurotronic COMET Z-Wave Plus Thermostat is an energy-saving controller compatible with the Z-Wave wireless standard. With this regulator, the Z-Wave smart home network can be expanded with an energy-saving component. Depending on the mode, the energy-saving controller can be used as a heating thermostat or act solely as an actuator when the control is deactivated. The temperature measured by the internal sensor or the position of the valve motor can be reported back to the corresponding gateway via Z-Wave (consider compatibility to your Z-Wave gateway). Equipped with FLiRS (Frequently Listening Receiver Slave), the energy-saving controller responds to incoming commands ( e.g. temperature changes) with a particularly short latent time. Features: Z-Wave Radiator Thermostat FLiRS function Illuminated LED Display Heating and saving times individually programmable Key lock Window-open-detection Holiday function Frost protection function Anti-scale function Power supply: 2 x 1,5V LR6/Mignon/AA Connection: M30 x 1,5mm Delivery scope: Comet Z-Wave, Quick Start Guide, 2 LR6/Mignon/AA batteries, 3 plastic adapters (Danfoss RA, RAV, RAVL), screw
Intern rumssensor Effektregulator Adaptiv reglering Temperaturbegränsning Veckoprogram Hem / borta / frostskydd Intuitiv app - lätt att använda Larm och meddelanden i appen Uppdatering av fast programvara (OTA) Energikalkylator Lås/barnlås Kalibrering Amazon Cloud Norskt/svenskt/engelskt/finskt/nederländskt språk
RT controls are used in general industrial and marine sectors. The RT temperature switch series consist of a variety of ordinary room temperature switches and remote sensor temperature switches including neutral zone temperature switches. RT temperature s
tado° Smart Radiator Thermostat X hjälper dig att spara energi och pengar varje dag, tack vare dess unika funktioner. tado° är experterna på smart värme. Våra produkter har installerats, testats och rekommenderats miljontals gånger. tado°-användare sparar i genomsnitt 22 % energi.
Danfoss SSM underfloor heating manifold in stainless steel with output for 2 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.
878 kr
