2 095 krPanorama Antennas Fordonsantenn 4x4 Mimo 5g/4g Wifi Svart
Kan monteras på en ledande eller icke-ledande panel
Köp hosDustin HomeKöpa.se innehåller annonslänkar. Läs mer
Kjell & CoDenna vinklingsbara antenn är designad för mobilt bredband och stöder 2G, 3G och 4G nätverk. Med en antennvinst som ökar med frekvensen, ger den förbättrad signalstyrka. Den är anpassad för antennfot och har en SMA-hane anslutning.
2 095 krKan monteras på en ledande eller icke-ledande panel
Köp hosDustin Home
429 krRundstrålande 4G-antenn med Mimo för takmontering. Liten och smidig och med en antennvinst på upp till 2,5 dBi. Lämplig för exempelvis bil, husbil och båt och är IP67-klassad för att tåla tuffa väderförhållanden. Kräver minimalt monteringshål i taket och skruvas fast med mutter från insidan. Passar RUT240 och RUT950. Levereras med 3 meter kabel. Anslutningar: 2x SMA-hanar. Frekvensomfång: 698-960 och 1710-2690 MHz. Mått: ∅80x15 mm. Vikt: 250 g.
Köp hosKjell & Co
5 662 krFinished package for those who want a stable 3G/4G network with the option to connect to an existing WiFi network. This package is for those who are looking for a smooth installation and quality. Teltonika RUTX11 has many configuration possibilities such as OpenVPN and Site-To-Site VPN, Support for DDNS and Ping reboot. All the functions required for you to be able to take the system with you when you have to work out in the field or just want to enjoy some nice series on the plate. In this package, the antenna already has 2 meters of antenna cable mounted directly on the element. To install this package, you need to do the following: Check the roof and see where the best mounting location for the antenna is, keep in mind that the antenna wants to be as free as possible. Try to mount the router so that it is not in the way or will be damaged. Configuration is handled via IP, the IP address is on the modem. To connect to an existing network, browse to RUTX11 and scan for networks, click on the network you want to connect to and enter the password.
Köp hosLoh Electronics
115 krAntenna adapter from TS9 connector to SMA female connector Suitable for the very latest modems and mobile routers from Huawei and ZTE, among others the following Zyxel NR5103E (4 sockets TS9) ZTE MF297D ZTE MF93D ZTE MF910 ZTE MF821D < span style="line-height: 1.6em;">ZTE MF80 ZTE MF823 Huawei E5372 Huawei E5776 Huawei E589 Huawei E392 Huawei E398 Huawei E368 Huawei E397 < br /> or any product with TS9 connector. If you are unsure, contact us and we will find the right one. We recommend this antenna for best performance if you have 2 antenna connectors: Poynting XPOL 5G The cable is approx. 10cm long excluding connectors and works in exactly the same way and with the same quality as the original adapter. NOTE! Not suitable for e.g. Huawei E3276 or other modems/routers with CRC9 connector. See this one instead.
Köp hosLoh Electronics
1 749 krWe highly recommend this to anyone who has the opportunity to mount it. Very popular and proven antenna for all mobile broadband networks Gives many a night and day sensation in connection and signal quality. If you have the opportunity to mount this antenna, it is a given choice - this is undoubtedly one of our best antennas. This is a genuine multiband antenna for both 4G 800MHz, GSM 900, GSM 1800, 3G 2100, 4G 2600 and 5G 3800mhz. Fits frequency bands 698 - 960 MHz, 1710 - 2700 MHz and 3400 - 3800 MHz. In plain language, this means that this antenna fits all the Swedish 3G, 4G and even 5G networks that are in use today and in the planned future, no exceptions. The antenna cable that comes with it is 7m long. For suitable extension cables, see the accessories tab above the product text, or contact us if you would like a tailored cable length according to your needs. No adapter is needed for e.g. Huawei B618, B715, B525, B315, B593s, E5186s D-Link DWR-923, DWR-921 or ZTE MF28G. This adapter fits e.g. Huawei B618, E392, E398 and ZTE MF821D. This adapter fits e.g. Huawei E3276, E3372, E3272 What to expect If you don't get reception indoors but can get reception outdoors, a roof-mounted directional antenna is probably the only solution. This installation can give you 3-5 extra bars in reception which in turn means a real speed increase. Very stable antenna in cast aluminum Built to handle all kinds of weather and winds. The antenna is delivered with a bracket for the antenna tube, perfect for attaching to, for example, the existing tube for the TV antenna or mounted on a house wall. The high location above the roof ridge gives a much stronger signal than a location at a lower level. The antenna has a 7 meter Low Loss cable with SMA male. The antenna cable can be extended as needed, but try to keep the cable as short as possible for best effect. Install 2 directional antennas for MiMo reception An installation with 2 directional antennas is usually called MiMo setup. It is of course fine to put the antennas above/underneath each other on the same mast tube, but if you want to get the most out of your antennas, we recommend that you use a dedicated MiMo mount. We essentially have two different brackets for this Good bracket BRKT-030 - bracket for one vertical/one horizontal antenna Best bracket BRKT-033 - bracket for 45 degree MiMo installation Important information regarding installation of directional antennas Your 3G/4G USB adapter or router takes up to 1 minute to show that the signal strength has changed. Therefore, it is important that you take your time to set the right direction. Turn 10 degrees, wait up to a minute, check signal strength, turn 10 degrees, etc. The best thing is to measure the speed while you are installing, but do not hold the antenna but your hand. Your operators can give out position to your nearest base station so that you can get a direction to go. If you feel unsure about how to install your directional antenna or need help aligning it once you have installed it, we are happy to help by email or phone! Suitable for products such as Huawei B618, B525, B315, E5186s, Huawei B593s, Huawei E5172, D-Link DWR-923, D-Link DWR-921 or other routers with SMA input for external antenna.
Köp hosLoh Electronics
2 619 krPanorama GPSD is a compact vehicle antenna (shark fin) that includes 2x2 MiMo function for 5G/4G/3G, 4x4 MiMo WiFi 2.4/5GHz, an active antenna for GPS. Additionally, there is an integrated mount for an external rod antenna that can support a range of VHF, UHF or 700/800MHz antennas. This model also supports 4x4 MiMo WiFi for 2.4/5GHz. GPSD is designed for multiple antenna functions while being discreet. Suitable areas of use are in security, transport and industrial applications. It is cost-effective and robust as it requires only one hole for mounting. You increase the resale value, reduce the installation time and lower the cost.
Köp hosLoh Electronics
59 krAntennadapter med TS9-anslutning
Köp hosDustin Home
429 krPanorama rugged vehicle/M2M antenna for 5G/4G/3G and 2G/GSM. Supplied with removable bracket, 5 meter antenna cable and SMA male connection. The antenna has a built-in ground plane and fits therefore on all surfaces. Gain 3-5dBi depending on frequency. Frequency range 617-960 and 1710-6000MHz. Suitable for all 5G/4G/3G and 2G/GSM as well as WiMax frequencies. Cable length 5 meters and connection SMA male. The antenna is 48 mm in diameter and 82 mm high. 13 mm long threaded bushing with 14 mm diameter and nut. The bottom plate is equipped with double-sided tape. Working temperature -40 to +80°C, IP65.
Köp hosLoh Electronics